Alkaline BufferȘ is a non-phosphate buffer to raise pH and buffer with Acid BufferȘ. These buffers are designed for the planted aquarium or for very hard water where phosphate buffers may pose an algae or cloudiness problem. Alkaline BufferȘ raises pH and buffers between 7.2 and 8.5. It is gentle, safe, and enhances the freshwater environment. Contains sodium, potassium, magnesium, and other bicarbonate salts.
DIRECTIONS: Use 7 g (1 level teaspoon) for every 40 L (10 gallons*) daily until desired pH is reached (this dose raises alkalinity by about 2 meq/L (5.6 dKH)). If water is soft or not well buffered, use with Acid BufferȘ (see below). HINTS: Alkaline BufferȘ will not lower pH. It may be added directly to the aquarium at any time. It preferentially buffers at pH 7.8, but can manage any pH between 7.2 and 8.5 when used with Acid BufferȘ. If using with RO or DI water for a water change, then use with Acid BufferȘ at a fixed ratio (see chart) to set the desired pH. Once pH is set add water change water to aquarium as soon as possible to avoid pH fluctuations (for best results, base ratio on wei
Part #: ASM237
Item Name: Alkaline Buffer 1 Kilogram